[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0

Items where Subject is "600 Technology > 08 Food technology > 02 Baking"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 44.

Article

Chhanwal, N. and Indrani, D. and Raghavarao, K. S. M. S. and Anandharamakrishnan, C. (2011) Computational fluid dynamics modeling of bread baking process. Food Research International, 44. pp. 978-983.

Chhanwal, N. and Anishaparvin, A. and Indrani, D. and Raghavarao, K.S.M.S. and Anandharamakrishnan, C. (2010) Computational fluid dynamics (CFD) modeling of an electrical heating oven for bread-baking process. Journal of Food Engineering, 100. pp. 452-460.

Crassina, K. and Sudha, M. L. (2015) Evaluation of rheological, bioactives and baking characteristics of mango ginger (curcuma amada) enriched soup sticks. Journal of Food Science and Technology, 52 (9). pp. 5922-5929. ISSN 0022-1155

Gupta, T. R. (2001) Individual heat transfer modes during contact baking of Indian unleavened flat bread (chapati) in a continuous oven. Journal of Food Engineering, 47 (4). 313-319, 9 ref..

Indrani, D. and Prabhasankar, P. and Rajiv, J. and Venkateswara Rao, G. (2003) Scanning electron microscopy, rheological characteristics, and bread-baking performance of wheat-flour dough as affected by enzymes. Journal of Food Science, 68 (9). pp. 2804-2809.

Narayanan, K. M. and Kapur, N. S. and Bhatia, D. S. (1959) Effect of baking on the stability of B-vitamins in biscuits enriched with proteins and vitamins. Food Science, 8. pp. 79-80.

Prabhasankar, P. and Indrani, D. and Venkateswara Rao, G. and Rajiv, Jyotsna (2003) Scanning electron microscopic and electrophoretic studies of the baking process of south Indian parotta—an unleavened flat bread. Food Chemistry, 82. pp. 603-609. ISSN 0308-8146

Raghavan, C. V. and Srichandan Babu, R. and Nagin, Chand. and Srinivasa Rao, P. N. (1996) Response Surface Analysis of Power Consumption of Dough Sheeting as a Function of Gap, Reduction Ratio, Water, Salt and Fat. Journal of Food Science and Technology, 33 (4). pp. 313-321. ISSN 0022-1155

Ravi, R. and Sai Manohar, R. and Haridas Rao, P. (2000) Influence of additives on the rheological characteristics and baking quality of wheat flours. European Food Research and Technology, 210. pp. 202-208.

Sai Manohar, R. and Haridas Rao, P. (1999) Effects of water on the rheological characteristics of biscuit dough and quality of biscuits. European Food Research and Technology, 209. pp. 281-285.

Saxena, D. C. and Haridas Rao, P. (1996) Effect of different baking modes on the physico-chemical and sensory characteristics of tandoori roti. Zeitschrift fuer Lebensmittel Untersuchung und Forschung, 203 (3). pp. 262-267.

Saxena, D. C. and Haridas Rao, P. (1996) Optimization of ingredients and process conditions for the preparation of tandoori roti using response surface methodology. International Journal of Food Science and Technology, 31 (4). 345-351, 16 ref..

Shyama Prasad Rao, R. and Sai Manohar, R. and Muralikrishna, G. (2007) Functional properties of water-soluble non-starch polysaccharides from rice and ragi: Effect on dough characteristics and baking quality. LWT - Food Science and Technology, 40 (10). pp. 1678-1686.

Subrahmanyan, V. and Bains, G. S. and Bhatia, D. S. and Swaminathan, M. (1958) The effect of baking on the nutritive value of fortified biscuits. Food Science, 7. pp. 83-86.

Tara, K. A. and Rao, P. H. and Bains, G. S. (1969) Composition and rheological and baking quality of a by-product of wheat milling simulating whole wheatmeal. Journal of the Science of Food and Agriculture, 20 (6). 368-73, 43 ref..

Vatsala, C. N. and Saxena, C. D. and Rao, P. H. (2001) Optimization of ingredients and process conditions for the preparation of puri using response surface methodology. International Journal of Food Science and Technology, 36 (4). 407-414, 12 ref..

Venkateswara Rao, G. and Indrani, D. (1990) Comparative Suitability of Resultant Atta and Whole Wheat Flour for Brown Bread. Journal of Food Science and Technology, 27 (2). pp. 89-92. (Submitted)

Venkateswara Rao, G. and Weipert, D. and Seibel, W. (1986) Effect of additives on the rheological and baking characteristics of different extraction rate wheat flours. Journal of Food Science and Technology, 23 (4). pp. 183-189.

Yella Reddy, S. (2010) Improving Plasticity of Milk Fat for Use in Baking by Fractionation. Journal of the American Oil Chemists Society, 87 (5). pp. 493-497.

Book

Indrani, D. and Venkateswara Rao, G. (2008) Functions of Ingredients in the Baking of Sweet Goods. CRC Press, New York. ISBN 978‑1‑4200‑5274‑9

Thesis

Abhinav, Sharma (2009) Application of Microwave Baking for Bakery Products. Masters thesis, University of Mysore.

Ashutosh, Bhupendra Tank (2010) Application of Computational Fluid Dynamics (CFD) in bread making process. Masters thesis, University of Mysore.

Eswaran, K (1993) Vital gluten production, properties and uses. Masters thesis, Central Food Technological Research Institute.

Grace, George (1998) Resistant starch : Its chemistry and application in baking. Masters thesis, Central Food Technological Research Institute.

Patel, M. M (1992) Studies on the effect of blackgram on rheological and baking characteristics of wheat flour. Doctoral thesis, Central Food Technological Research Institute.

Puneet, Sharma (2002) Recent developments on the effect of enzymes on rheological characteristics of wheat flour dough and its baking quality. Masters thesis, Central Food Technological Research Institute.

Raghunandhan, R (1987) Damaged wheat and its effect on milling and baking. Masters thesis, Central Food Technological Reseach Institution.

Raghuram, A.S. (2004) Recent Developments in Bread Making Methods. Masters thesis, University of Mysore.

Ritu, Saini (1999) Rheology of biscuit dough. Masters thesis, Central Food Technological Research Institute.

Roshini, T. (1997) The role of polar lipids in baking. Masters thesis, Central Food Technological Research Institute.

Soman, Shiny (1997) Starch damage and its significance in baking. Masters thesis, Central Food Technological Research Institute.

Veepul, Lakhanpal (2005) Effect Of Enzymes And Surfactants On Farinograph, Alveograph And Bread Making Characteristics Of Wheat Flour. Masters thesis, University of Mysore.

Student Project Report

Anupama, K.S. (2007) Effect of Amaranthus Seeds (Amaranthus Paniculatus) Incorporation on Physico-Chemical and Sensory Quality of Chapati. [Student Project Report]

Arushi, Bhaskar (2024) Flour Quality Requirements for Cookies. [Student Project Report] (Submitted)

Ashwini, A. (2007) Effect of Hydrocolloids and Emulsifiers on Rheological, Microstructural and Quality Characteristics of Eggless cakes. [Student Project Report]

Aswani, S and Varsha, T. S and Mr, Krishnaprasad and Agritha, C (2024) Starch based emulsion as a fat replacer in baking application. [Student Project Report] (Submitted)

Kumbhar Amruta, Ajit (2024) Studies Of Effect of Grinding Variations On Acrylamide Content Of Baked Food. [Student Project Report] (Submitted)

Ms., Smrithi (2024) A comparative study of benzoic acid, sorbicacid and synthetic colours in locally produced and commercially available baked products. [Student Project Report] (Submitted)

Puneet, Sharma (2002) Studies on oxidases in relation to rheological characteristics of the dough and quality of bread. [Student Project Report] (Submitted)

Sangeeta, Chattopadhyay (2008) Studies on ready to bake chapattis. [Student Project Report]

Seependra, Kumar (1997) Effect of reducing agents on dough rheology and baking performance of semi-sweet biscuits. [Student Project Report] (Submitted)

Shrutika Rohidas, Khandagale (2024) Development of gluten-free ready to bake brownie premix. [Student Project Report] (Submitted)

Sufi, Ruksaar (2024) Development of traditional ingredient-based cookies for lactating women. [Student Project Report] (Submitted)

Vinita, Mansharamani (1990) Suitablility of different mill streams from soft wheat flour for cake making. [Student Project Report] (Submitted)

This list was generated on Thu Nov 21 17:35:02 2024 IST.