[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0

Items where Subject is "500 Natural Sciences and Mathematics > 04 Chemistry and Allied Sciences > 27 Polymer Chemistry"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | D | E | H | I | J | K | M | N | P | R | S | T | U | V
Number of items at this level: 87.


Akshay, V. (2022) Development of Nanocellulose Based Biocomposites Films for Food Packaging Applications. Masters thesis, Central Food Technological Research Institute.

Alok Kumar, Soni (2014) Removal of selected analytes using molecular imprinted polymer. [Student Project Report] (Submitted)

Anil Kumar, P. K. (2007) Cloning and characterization of genes involved in polyhydroxyalkanoates synthesis in Bacillus spp. Doctoral thesis, University of Mysore.

Archana, K. M. (2009) Characterization of Polyhydroxyalkanoates Produced by Bacillus Species with Different Polymeric Substrates. [Student Project Report] (Submitted)

Arunkumar, R. and Harish Prashanth, K. V. (2015) Biodegradable Poly (Lactic-co-Glycolic Acid)–Polyethylene Glycol Nanocapsules: An Efficient Carrier for Improved Solubility, Bioavailability, and Anticancer Property of Lutein. Journal of Pharmaceutical Sciences, 104 (6). pp. 2085-2093.


Baldev, Raj and Jagadish, R. S. and Srinivas, P. and Mr., Siddaramaiah (2005) Crosslinking of Low-Density Polyethylene by Diisocyanates for Superior Barrier Properties. Journal of Applied Polymer Science, 96. pp. 1193-1199.

Baldev, Raj and Annadurai, V. and Somashekar, R. (2001) Structure–property relation in low-density polyethylene–starch immiscible blends. European Polymer Journal, 37 (5). 943-948 .

Baldev, Raj and Eugene Raj, A. and Madan, P. and Mr., Siddaramaiah (2003) Modeling of Moisture Sorption Isotherms of Poly(vinyl alcohol)/Starch Films. Journal of Applied Polymer Science, 89. pp. 3874-3881.

Baldev, Raj and Udaya Sankar, K. and Mr., Siddaramaiah (2004) Low Density Polyethylene/Starch Blend Films for Food Packaging Applications. Advances in Polymer Technology, 23 (1). pp. 32-45.


Davis, Reeta and Chandrashekar, A. and Shamala, Tumkur R (2008) Role of (R)-specific enoyl coenzyme A hydratases of Pseudomonas sp in the production of polyhydroxyalkanoates. Antonie van Leeuwenhoek, 93 (3). pp. 285-96. ISSN 0003-6072

Divya, M.V. (2008) Production of Polyhydroxyalkanoates from Thermophilic Bacilli. [Student Project Report]

Divyashree, M. (2009) Media Optimization for Production of Polyhydroxyalkanoates by Bacillus species. [Student Project Report]

Divyashree, M. S. and Rastogi, N. K. and Shamala, T. R. (2009) A simple kinetic model for growth and biosynthesis of polyhydroxyalkanoate in Bacillus flexus. New Biotechnology, In Pre. ISSN 1871-6784

Divyashree, M. S. and Shamala, T. R. (2010) Extractability of polyhydroxyalkanoate synthesized by Bacillus flexus cultivated in organic and inorganic nutrient media. Indian Journal of Microbiology, 50 (1). pp. 63-69.

Divyashree, M. S. (2008) Polyhydroxyalkanoate from Bacillus sp.: Its production, isolation and characterization. PhD thesis, University of Mysore.


Esaivani, E. (2010) Characterization of Bacterial Polyhydroxyalkanoates from Agro-Industrial Residues. [Student Project Report]


Harish Prashanth, K. V. and Tharanathan, R. N. (2003) Studies on graft copolymerization of chitosan with synthetic monomers. Carbohydrate Polymers, 54 (3). pp. 343-351.

Hitesh, J. and Umesh Hebbar, H. (2021) Plant-based biopolymers: emerging bio-flocculants for microalgal biomass recovery. Reviews in Environmental Science and Biotechnology, 20. pp. 143-165.


Indrakshi, Paul (2014) Antimicrobial activity and physico-mechanical properties of curcumin, nanocurcumin and chilli extract incorporated methylcellulose film. [Student Project Report] (Submitted)

Irfan Ali, K. (2009) Enhanced synthesis of polyhydroxyalkanoates and -amylase by Bacillus sp. [Student Project Report]


Jacob, Joseph (2017) Characterization of Gold Nano Incorporated Biofilim. [Student Project Report] (Submitted)

Jagadish, R. S. (2010) Modification of Polyolefins and selected natural polymers for improved properties in food packaging applications. PhD thesis, University of Mysore.

Jagadish, R. S. and Baldev, Raj (2011) Properties and sorption studies of polyethylene oxide-starch blended films. Food Hydrocolloids, 25. pp. 1572-1580. ISSN 0268-005X

Jagadish, R. S. and Baldev, Raj (2013) Structure Property Relations in Polyethylene Oxide /Starch Blended Films Using WAXS Techniques. Journal of Applied Polymer Science, 127. pp. 1191-1197.

Jagadish, R. S. and Baldev, Raj and Srinivas, P. (2009) Chemical Modification of Polypropylene with Diisocyanates for Improved Gas Barrier and Mechanical Properties. Advances in Polymer Technology, 28 (4). pp. 233-245.


Kalaivani, R. (2010) Production of Bacterial Polyhydroxy-Alkanoates from Agro-Industrial Residues. [Student Project Report]

Kamalamma, V. and Balasubramanyam, N. and Anandaswamy, B. (1981) Preliminary extraction studies on polyethylene films and containers to assess their suitability for food packaging. Perfect pac, 21/22 (12/1). 5-8, 5 ref..

Kondabagil, R. Kiran and Soundar, Divakar (2003) Lipase-catalysed polymerization of lactic acid and its film forming properties. World Journal of Microbiology & Biotechnology, 19. pp. 859-865.

Krishnakumar, Rohan (2007) Preparation of Chitosan Based Films Using Field Assisted Techniques – Ultrasonication and Infrared. [Student Project Report]

Kshama, Lakshman (2004) Studies on the Production of Biopolymers by Rhizobium Sps. Their Isolation and Characterization. PhD thesis, University of Mysore.


Madhumathi, M. (2006) Characterization and Production of Polyhydroxyalkanoates by Amphibacillus sp. [Student Project Report]

Mahalakshmi, M. (2009) Characterization of Polyhydroxyalkanoates Produced by Bacillus spp. from Starch Containing Medium. [Student Project Report]

Manasa, P. (2009) Characterization of Polyhydroxyalkanoates Producing Bacillus species. [Student Project Report]

Manasi, B.S and Shilpa, L. and Harshavardhan, J.B and Muddassir, Shah (2006) Molecular Detection of bacteria producing polyhydroxyalkanoates and characterization of polyhydroxyalkanoates. [Student Project Report]

Manik, Jana and Raja, Narayansamy and Usharani, D. and Kamini, Tripathi and Harapriya, Rath (2022) Fluoride ion coordination-induced turn-on fluorescence of tailored N-methyl N-confused tripyrromonomethene analogues. Organic and Biomolecular Chemistry, 20. pp. 6741-6749.

Matche, R. S. and Anup, G. J. and Mrudula, Guggilla (2020) Development of Biodegradable Films from Marine Ingredients Incorporated with Natural Antimicrobial Agents for Food Packaging. Journal of Packaging Technology and Research.

Megha, N. (2017) Biodegradable Nanocomposite PLA Films with Chitosan Nanofillers for Various Packaging Applications. [Student Project Report] (Submitted)

Monika, Shukla (2017) Fabrication of Cellulose Based Zinc Oxide Nanocomposite Films. [Student Project Report] (Submitted)

Mr., Siddaramaiah and Baldev, Raj and Somashekar, R. (2004) Structure–Property Relation in Polyvinyl Alcohol/Starch Composites. Journal of Applied Polymer Science, 91. pp. 630-635.

Ms, Neetu (2020) Preparation and characterization of copper nanoparticles Reinforced Corn zein bio-nanocomposite Films. [Student Project Report] (Submitted)

Ms., Angelina (2018) High Cell Density Fermentation Process for Polyhydroxyalkanoates Production by Halophilic Bacteria. Doctoral thesis, Academy of Scientific and Innovative Resarch.

Muthu, M. and Narasimhan, K. S. (1964) Studies on methods for selecting materials as fumigation sheets -I. Permeability of liquid fumigants through polyethylene. Proceedings of the symposium on Pesticides, Mysore. pp. 54-59.


Nanditha Rao, D. (2011) Agro residues a s a carbon source for the production of polyhydroxyalkanoates by Sinorhizobium meliloti MTCC. [Student Project Report]


Palaniswami, Ravi and Soundar, Divakar (2000) Beta-Cyclodextrin Mediated Synthesis of Sterically Controlled Styrene-acrylonitrile Copolymer. Journal of Inclusion Phenomena and Macrocyclic Chemistry, 38. pp. 323-336.

Palanivel, G. (2006) Characterization Of Exopolysaccharide Produced By Leuconostoc Sp Cfr 2181 & Lactobacillus Sp Cfr 2182. [Student Project Report]

Pallavi Ramesh, Dhoke (2016) Molecularly imprinted polymers for removal of monocrotophos from environmental sample. [Student Project Report] (Submitted)

Prakash, M. Halami (2008) Production of polyhydroxyalkanoate from starch by the native isolate Bacillus cereus CFR06. World Journal of Microbiology and Biotechnology, 24. pp. 805-812.

Priya, Mahala (2020) Preparation and Characterization of Zein Nanoparticles Reinforced Tamarind Starch Based Food Packaging Films. [Student Project Report] (Submitted)


Raghavarao, K. S. M. S. and Ranganathan, T. V. and Srinivas, N. D. and Barhate, R. S. (2003) Aqueous two phase extraction—an environmentally benign technique. Clean Technologies and Environmental Policy, 5. pp. 136-141.

Raj, Baldev and Raj, Eugene and Kumar, K. R. and Mr., Siddaramaiah (2002) Moisture-Sorption Characteristics of Starch/Low-Density Polyethylene Films. Journal of Applied Polymer Science, 84. pp. 1193-1202.

Rajesh, M. (2012) Preparation and characterization of biodegradable chitosan-poly-€-caprolactone based nanocomposite blendfilms. [Student Project Report] (Submitted)

Ramaswamy, Ravichandran and Divakar, S. (1999) Regulatory nature of β-cyclodextrin in selective ring-opening during reduction of styrene oxide. Journal of Molecular Catalysis A: Chemical, 137. pp. 31-39.

Ramesh Baba, A. and Channe Gowda, D. and Udaya Sankar, K. (2005) Phenylalanine and isoleucine containing protein-based polymers as new biomaterials: Synthesis and solid state properties. Indian Journal of Chemistry, 44B. pp. 1487-1493.

Rampura, S. Jagadish and Baldev, Raj and Parameswara, Puttanna and Somashekar, R. (2010) Effect of glycerol on structure–property relations in chitosan/poly(ethylene oxide) blended films investigated using wide-angle X-ray diffraction. Polymer International, 59. pp. 931-936.

Ramya, V. and Yamini, Sivaraman and Keshava Murthy, P. S. and Jeevan Prasad, Reddy Dandu (2022) Synthesis of lignin nanoparticles employing acid precipitation method and its application to enhance the mechanical, UV-barrier and antioxidant properties of chitosan films. International Journal of Polymer Analysis and Characterization, 27 (2). pp. 99-110.

Ranganath, P. (2011) Studies on Production of Sinorhizobium Melilote Mtcc 100 using Agro Residues. [Student Project Report]

Rao, G. V. and Rao, K. S. (1992) Evidence for a hydroxy-aluminium polymer (Al13) in synaptosomes. FEBS letters, 311 (1). pp. 49-50. ISSN 0014-5793

Ravi, P. and Divakar, S. (1999) Beta-Cyclodextrin Regulated Stereoregularity and Molecular Weight in Inclusion Polymerization of Acrylonitrile. Journal of Macromolecular Science: Pure Applied Chemistry, A36 (12). pp. 1935-1948.

Ravi, P. and Udaya Sankar, K. and Divakar, S. (2000) Beta-Cyclodextrin Mediated Synthesis of Syndiotactic-rich Polystyrene. Journal of Inclusion Phenomena and Macrocyclic Chemistry, 38. pp. 99-112.

Reeta, Davis and Anil Kumar, P. K. and Chandrashekar, A. and Shamala, T. R. (2008) Biosynthesis of polyhydroxyalkanoates co-polymer in E. coli using genes from Pseudomonas and Bacillus. Antonie van Leeuwenhoek, 94 (2). pp. 207-16. ISSN 0003-6072

Reeta, Davis (2008) Studies on the Molecular Mechanism of Polyhydroxyalkanoate Biosynthesis in Pseudomonas species. PhD thesis, University of Mysore.


Saranya Devi, E. (2011) Studies on Intra and Extra Cellular Polymers of Rhizobium Meliloti. [Student Project Report]

Saranya Devi, E. and Vijayendra, S. V. N. and Shamala, T. R. (2012) Exploration of ricebran, an agro-industry residue, for the production of intra- and extra-cellular polymers by Sinorhizobium meliloti MTCC 100. Biocatalysis and Agricultural Biotechnology, 1 (1). pp. 80-84.

Saravanan, L. and Subramanian, S. and Vishu Kumar, A. B. and Tharanathan, R. N. (2006) Surface chemical studies on SiC suspension in the presence of chitosan. Ceramics International, 32. pp. 637-646.

Saroja, N. (2000) Preparation And Characterisation Of Polysaccharide-Based Biodegradable Films. PhD thesis, University of Mysore.

Shanthi, G. (2006) Electroporation of Bacillus Cereus Cfr04 for Easy Recovery Of Pha. [Student Project Report]

Sharath Kumar, N. (2019) Bionanocomposites for Extension of Shelf Life of Fruits and Vegetables. Masters thesis, Central Food Technological Research Institute.

Shinsmon, Jose (2005) Molecular Characterization Of Bacillus Sp. Accumulating Polyhydroxyalkanoates. [Student Project Report]

Siddesh, Odeyar K. (2021) Preparation and Characterization of Polylactic acid (PLA)/Cuminaldehyde blend flavoured films for Food Packaging Applications. [Student Project Report] (Submitted)

Sneha, Mohanan (2017) Synthesis And Characterization Of Zinc Oxide Loaded Bio- Nanocomposite Films. [Student Project Report] (Submitted)

Sneha Elizabeth, Mary (2022) Development of flexible zein films functionalized with copper particles for food packaging applications. [Student Project Report] (Submitted)

Sreekanth, M. S and Vijayendra, S. V. N. and Joshi, G. J. and Shamala, T. R. (2013) Effect of carbon and nitrogen sources on simultaneous production of α-amylase and green food packaging polymer by Bacillus sp. CFR 67. Journal of Food Science and Technology, 50 (2). pp. 404-408. ISSN 0022-1155

Sreekanth, M. S (2009) Effect of different carbon and nitrogen sources on Polyhydroxyalkanoates and α-amylase production by Bacillus cereus. [Student Project Report]

Sreenivas Rao, S. (1985) Evaluation of polyester laminates for the packaging of savoury food. [Student Project Report] (Submitted)

Sreenivas Rao, S. (1984) Use of polyesters in food packaging. Masters thesis, Central Food Technological Research Institute.

Srinivasa, P. C. and Ramesh, M. N. and Kumar, K. R. and Tharanathan, R. N. (2003) Properties and sorption studies of chitosan-polyvinyl alcohol blend films. Carbohydrate Polymers, 53 (4). pp. 431-438.

Srinivasa, P. C. and Ramesh, M. N. and Tharanathan, R. N. (2007) Effect of plasticizers and fatty acids on mechanical and permeability characteristics of chitosan films. Food Hydrocolloids , 21. pp. 1113-1122.

Sudhamani, S. R. and Eugene Raj, A. and Baldev, Raj and Prasad, M. S. (2005) Moisture Sorption Characteristics of Microbially Produced Polysaccharide and Polyvinyl Alcohol Blends. Journal of Polymers and the Environment, 13 (3). pp. 253-260.

Sushma, M. (2011) Partial characterization of polyhydroxyalkanoates produced by Sinorhizobium meliloti MTCC 100 by using different agro residues. [Student Project Report]

Swapna Joseph, C. and Harish Prashanth, K. V. and Rastogi, N. K. and Indiramma, A. R. (2010) Optimum Blend of Chitosan and Poly-(ε-caprolactone) for Fabrication of Films for Food Packaging Applications. Food Bioprocess Technology.


Thaniya, N (2022) Development of Pectin-Based Antibacterial Films Induced with Bacterial Cellulose-Cuo Nanofillers for Food Packaging Applications. [Student Project Report] (Submitted)

Thrideep, T Nair (2022) Development and Analysis of Regenerated Cellulose-Alkali Lignin Biocomposite Films For Food Packaging Applications. [Student Project Report] (Submitted)


Usha Rani, M. (2011) Microbiological and molecular characterization of cellulose producing Gluconacetobacter sp. Doctoral thesis, University of Mysore.

Usha Rani, M. and Anu Appaiah, K. A. (2011) Optimization of culture conditions for bacterial cellulose production from Gluconacetobacter hansenii UAC09. Annals of Microbiology, 61. pp. 781-787.


Veeramani, S. (2005) Studies On Polyhydroxyalkanoates and Pigments Produced By Micrococcus Sp. [Student Project Report]

Vijayendra, S. V. N. and Rastogi, N. K. and Shamala, T. R. and Anil Kumar, P. K. (2007) Optimization of polyhydroxybutyrate production by Bacillus sp.CFR 256 with corn steep liquor as a nitrogen source. Indian Journal of Microbiology, 47. pp. 170-175.

Vishu Kumar, A. B. and Varadaraj, M. C. and Lalitha, R. Gowda and Tharanathan, R. N. (2004) Low molecular weight chitosans: preparation with the aid of papain and characterization. Biochimica et Biophysica Acta, 1670 (2). pp. 137-46. ISSN 0006-3002

This list was generated on Thu Oct 5 03:53:56 2023 IST.