[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0

Items where Subject is "600 Technology > 08 Food technology > 04 Milling"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 211.

Article

Aashitosh, A. Inamdar and Prabhasankar, P. (2017) Influence of Stone Chakki Settings on the Characteristics of Whole Wheat Flour (Atta) and its Chapati Making Quality. Journal of Food Processing and Preservation, 41. pp. 1-11.

Aashitosh, A. Inamdar and Suresh, D. Sakhare and Shivakumara, M. and Prabhasankar, P. (2023) Effect of hydrothermal pre‑treatment and development of non‑stone chakki atta. Journal of Food Measurement and Characterization.

Amla, B. L. and Shurpalekar, S. R. (1975) Machinery for cereal and pulse milling industry. Journal of Food Science and Technology, India, 12 (6). pp. 279-283.

Amrita, Ray and Aashitosh, A. Inamdar and Suresh, D. Sakhare and Alok, K. Srivastava (2021) Development of physical process for quinoa fractionation and targeted separation of germ with physical, chemical and SEM studies. LWT - Food Science and Technology, 141. p. 110957. ISSN 0023-6438

Anjali, Rana and Oorjitha, Dogiparthi and Suresh, D. Sakhare and Sathyendra Rao, B. V. and Aashitosh, A. Inamdar (2023) Study on the utilization of by‑products of wheat milling industry for the development of biodegradable plates. Journal of Food Science and Technology, 60 (7). pp. 2042-2049. ISSN 0022-1155

Bains, G. S. (1967) National policy on processing and milling of food grains. I. Wheat and wheat products. Research and Industry, 12. pp. 254-257.

Bhashyam, M. K. and Srinivas, T. (1984) Varietal difference in the topography of rice grain and its influence on milling quality. Journal of Food Science, 49 (2). 393-395, 401.

Bhashyam, M. K. and Srinivas, T. and Desikachar, H. S. R. (1975) Controlled sun drying of freshly harvested paddy for improved milling quality. Journal of Food Science and Technology, India, 12 (3). 124-127, 10 ref..

Bhattacharya, K. R. (1969) Breakage of rice during milling, and effect of parboiling. Cereal Chemistry, 46 (5). 478-485, 16 ref..

Bhattacharya, K. R. (1980) Breakage of rice during milling: a review. Tropical Science, 22 (3). 255-276, 78 ref..

Bhattacharya, K. R. and Chakrabhavi, M. Sowbhagya. (1980) On the alkali degradation type of rice kernels. Journal of the Science of Food and Agriculture, 31 (6). 615-618, 7 ref..

Bhattacharya, K. R. and Indudhara Swamy, Y. M. (1967) Conditions of drying parboiled paddy for optimum milling quality. Cereal Chemistry, 44. pp. 592-609.

Bhattacharya, K. R. and Sowbhagya, C. M. (1976) Technical note: an alkali degradation test and an alcoholic alkali bran-staining test for determining the approximate degree of milling of rice. Journal of Food Technology, 11 (3). 309-312, 5 ref..

Bhattacharya, K. R. and Sowbhagya, C. M. (1972) A colorimetric bran pigment method for determining the degree of milling of rice. Journal of the Science of Food and Agriculture, 23 (2). 161-169, 10 ref..

Bhattacharya, K. R. and Subba Rao, P. V. (1966) Processing conditions and milling yield in parboiling of rice. Journal of Agricultural and Food Chemistry, 14. pp. 473-475.

Chandini, S. Kumar and Rati Rao, E. and Jamuna, Prakash (2005) Effect Of Varietal Differences And Polishing Of Rice On Quality Parameters Of Idli. Journal of Sensory Studies, 20 (5). pp. 397-409.

Chinnaswamy, R. and Bhattacharya, K. R. (1983) Studies on expanded rice. Optimum processing conditions. Journal of Food Science, 48 (6). pp. 1604-1608.

Desikachar, H. S. R. (1956) Chemical methods of determining the degree of polishing in rice. Internation Rice Commission. pp. 1-8.

Desikachar, H. S. R. (1955) Determination of the degree of polishing in rice. I. Some methods for comparison of the degree of milling. Cereal Chemistry, 32. pp. 71-77.

Desikachar, H. S. R. (1955) Determination of the degree of polishing in rice. II. Determination of thiamine and phosphorus for processing control. Cereal Chemistry, 32. pp. 78-80.

Desikachar, H. S. R. (1955) Determination of the degree of polishing in rice. III. The use of coloured rice as an indicator of the degree of bran removal in rice milling. Cereal Chemistry, 32. pp. 80-82.

Desikachar, H. S. R. (1956) Determination of the degree of polishing in rice. IV. Percentage loss of phosphorus as an index of the degree of milling. Cereal Chemistry, 33. pp. 320-323.

Desikachar, H. S. R. (1965) Rural processing of paddy. Journal of Food Science and Technology (India), 2 (4). pp. 103-104.

Desikachar, H. S. R. and Bhashyam, M. K. and Parpia, H. A. B. (1967) Relative yield of total and head rice from raw and parboiled paddy. Journal of Food Science and Technology, 4 (4). pp. 156-158.

Desikachar, H. S. R. and Bhashyam, M. K. and Ranganath, K. A. and Mahadevappa, M. (1973) Effect of differential maturity of paddy grains in a panicle on their milling quality. Journal of the Science of Food and Agriculture, 24 (8). 893-896, 7 ref..

Desikachar, H. S. R. and Raghavendra Rao, S. N. and Ananthachar, T. K. (1965) Effect of degree of milling on water absorption of rice during cooking. Journal of Food Science and Technology, 2. pp. 110-112.

Desikachar, H. S. R. and Sowbhagya, C. M. and Viraktamath, C. S. and Indudhara Swamy, Y. M. and Bhashyam, M. K. (1969) Steaming of paddy for improved culinary, milling and storage properties. Journal of Food Science and Technology (Mysore), 6 (2). 117-121, 8 ref..

Dube, R. and Indrani, D. and Leelavathi, K. and Sidhu, J. S. (1987) Flour mill streams. I. Physico-chemical and rheological characteristics. Indian Miller, 18 (1). pp. 17-19.

Gangadharappa, G. H. and Basavaraj, Mundalamani (2009) Determination of flourmill roll groove depth, machining time and power consumption by using computer aided spreadsheet. Journal of Food Science and Technology, 46 (4). pp. 388-391.

Gangadharappa, G. H. and Ramakrishna, R. and Prabhasankar, P. (2008) Chemical and scanning electron microscopic studies of wheat whole-meal and its streams from roller flour mill. Journal of Food Engineering, 85 (3). pp. 366-371.

Gopala Krishna, A. G. and Prabhakar, J. V. and Sen, D. P. (1984) Effect of degree of milling on tocopherol content of rice bran. Journal of Food Science and Technology, 21 (4). 222-224, 10 ref..

Hadimani, N. A. and Ali, S. Z. and Malleshi, N. G. (1995) Physico-chemical Composition and Processing Characteristics of Pearl Millet Varieties. Journal of Food Science and Technology, 32 (3). pp. 193-198.

Hadimani, N. A. and Malleshi, N. G. (1993) Studies on Milling, Physico-chemical Properties, Nutrient Composition and Dietary Fibre Content of Millets. Journal of Food Science and Technology (India), 30 (1). pp. 17-20.

Halim, A. and Bhattacharya, K. R. (1978) Effect of degree and pressure of milling on the stickiness of milled parboiled rice. Journal of Food Quality, 1 (4). 349-358, 9 ref..

Haridas Rao, P. (1996) Human Resource Development for Flour Milling Industry. Indian Miller. pp. 7-12.

Haridas Rao, P. and Leelavathi, K. and Shurpalekar, S. R. (1983) Comparative studies on atta (whole wheat flour) and resultant atta, a by-product of roller flour milling industry. Journal of Food Science and Technology, 20 (1). 5-8, 7 ref..

Haridas Rao, P. and Tara, K. A. and Bains, G. S. (1967) Studies of the quality of Indian milled flours. Journal of Food Science and Technology, 4 (1). pp. 2-5.

Haridas Rao, P. and Venkateshwar Reddy, K. (1993) Specific flours: Production and quality control. Indian Miller, 24 (1). pp. 109-114.

Haridas Rao, P. and Rahim, A. and Prabhavathi, C. and Shurpalekar, S. R. (1976) Physico-chemical, rheological and milling characteristics of Indian durum wheats. Journal of Food Science and Technology, India, 13 (6). 317-322, 6 ref..

Haridas Rao, P. and Srivastava, A. K. (2001) Micronutrient fortification in roller flour mills. Indian Miller, 31 (4). pp. 13-20.

Inamdar, Aashitosh.A and Suresh, D.Sakhare (2014) Application of color sorter in wheat milling. International Food Research Journal, 21 (6). pp. 2083-2089.

Indrani, D. and Leelavathi, K. and Sidhu, J. S. (1987) Flour mill streams. IV. Study of phytic acid distribution. Journal of Food Science and Technology, 24 (6). pp. 316-317.

Indrani, D. and Sukanya, S. and Sidhu, J. S. (1987) Genetic variability in the milling and vermicelli quality of some Indian durum wheat cultivars. Journal of Food Science and Technology, 24 (6). pp. 313-315.

Indudhara Swamy, Y. M. and Bhattacharya, K. R. (1982) Breakage of rice during milling. I. Types of cracked and immature grains. Journal of Food Science and Technology, 19 (3). 106-110, 13 ref..

Indudhara Swamy, Y. M. and Bhattacharya, K. R. (1982) Breakage of rice during milling. IV. Effect of kernel chalkiness. Journal of Food Science and Technology, 19 (3). 125-126, 7 ref..

Indudhara Swamy, Y. M. and Bhattacharya, K. R. (1980) Breakage of rice during milling - comparison among different shellers. Journal of Food Process Engineering, 3 (1). 43-47, 3 ref..

Indudhara Swamy, Y. M. and Bhattacharya, K. R. (1980) Breakage of rice during milling - effect of kernel defects and grain dimension. Journal of Food Process Engineering, 3 (1). 29-42, 8 ref..

Indudhara Swamy, Y. M. and Bhattacharya, K. R. (1984) Breakage of rice during milling. V. Effect of sheller, pearler and grain types. Journal of Food Science and Technology, 21 (1). 8-12, 6 ref..

Indudhara Swamy, Y. M. and Bhattacharya, K. R. (2009) Induction and healing of cracks in rice grain during water soaking of paddy. Journal of Food Science and Technology, 46 (2). pp. 136-138.

Jamuna, Prakash and Ramanatham, G. (1995) Proximate Composition and Protein Quality of Stabilized Rice Bran. Journal of Food Science and Technology, 32 (5). pp. 416-419.

Jyotsna, R. and Mr., Milind and Aashitosh, A. Inamdar and Suresh, D.Sakhare (2015) Roller milled black gram (Phaseolus mungo ) semolina and its influence on the quality characteristics of high protein pasta. Journal of Food Science and Technology, 52 (4). pp. 2464-2468.

Kalpanadevi, C. and Vasudeva, Singh and Subramanian, R. (2019) Impact of physicochemical properties on duration and head rice yield during abrasive and friction milling of rice. Journal of Food Science and Technology, 56 (8). pp. 3900-3909. ISSN 0022-1155

Kalpanadevi, C. and Vasudeva, Singh and Subramanian, R. (2018) Influence of milling on the nutritional composition of bran from different rice varieties. Journal of Food Science and Technology, 55 (6). pp. 2259-2269. ISSN 0022-1155

Kamani, Mohammad Hassan and Meera, M. S. (2021) Assessment of black gram milling by-product as a potential source of nutrients. Journal of Food Science and Technology, 58 (10). pp. 3844-3852. ISSN 0022-1155

Koppalu, V. Preetham Kumar and Usha, Dharmaraj and Suresh, D. Sakhare and Aashitosh, A. Inamdar (2016) Flour functionality and nutritional characteristics of different roller milled streams of foxtail millet (Setaria italica). LWT - Food Science and Technology, 73. pp. 274-279.

Krishnappa, K. C and Krishnaiah, M. M. (1972) Pollution and control in roller flour milling industry. Indian Miller, 22 (5). pp. 15-18.

Krishnappa, K. G. (1995) Energy conservation in roller flour mills through its accounting and auditing. Indian Miller, 25 (4). pp. 11-17.

Krishnappa, K. G. (1994) Study on electrical energy utilisation in roller flour milling industry. Indian Miller, 24 (6). 16-20, 10 ref..

Kumar, G. V. (1988) Principles of flow sheet. Indian Miller, 18 (5). 5-7,9,11,13..

Kumar, G. V. and Ranga Rao, G. C. P. and Venkateswara Rao, G. and Shurpalekar, S. R. (1979) Variability in the physico-chemical and milling characteristics of Indian triticales. Journal of Food Science and Technology, India, 16 (5). 181-184, 13 ref..

Kurien, P. P. and Desikachar, H. S. R. (1966) Preparation of a refined white flour from Ragi (Eleusine coracana) using a Laboratory Mill. Journal of Food Science and Technology, 3 (2). pp. 56-58.

Kurien, P. P. and Desikachar, H. S. R. (1962) Studies on refining of millet flours. I. Ragi (Eleusine coracana). Food Science, 11. pp. 136-137.

Kurien, P. P. and Parpia, H. A. B. (1968) Pulse milling in India. I - Processing and milling of Tur, Arhar (Cajanus cajan Linn). Journal of Food Science and Technology (Mysore), 5 (4). 203-207, 2 ref..

Kutumba Rao, S. and Chandrasekharan Kartha, C. and Appu Rao, B. and Thirumala Rao, S. D. and Murthy, K. S. (1962) Maize germ milling. Food Science, 12 (3). pp. 71-74.

Leelavathi, K. and Haridas Rao, P. and Shurpalekar, S. R. (1986) Studies on the functional characteristics of differently milled whole wheat flour (atta). Journal of Food Science and Technology, 23 (1). 10-14, 7 ref..

Mahadevappa, M. and Bhashyam, M. K. and Desikachar, H. S. R. (1969) The influence of harvesting date and traditional threshing practices on grain yield and milling quality of paddy. Journal of Food Science and Technology, 6 (4). 263-66, 7 ref..

Malleshi, N. G. and Desikachar, H. S. R. (1981) Studies on the suitability of roller flour mill, hammer mill and plate grinder for obtaining a refined flour from malted ragi (Eleusine coracana). Journal of Food Science and Technology, 18 (2). 37-39, 8 ref..

Malleshi, N. G. and Desikachar, H. S. R. (1985) Milling, popping and malting characteristics of some minor millets. Journal of Food Science and Technology, India, 22 (6). 400-403, 15 ref..

Malleshi, N. G. and Klopfenstein, C. F. (1998) Nutrient composition and amino acid contents of malted sorghum, pearl millet and finger millet and their milling fractions. Journal of Food Science and Technology, 35 (3). 247-249, 15 ref..

Malleshi, N. G. and Reddy, P. V. and Klopfenstein, C. F. (2004) Milling Trials of Sorghum, Pearl Millet and Finger Millet in Quadrumat Junior Mill and Experimental Roll Stands and the Nutrient Composition of Milling Fractions. Journal of Food Science and Technology, 41 (6). pp. 618-622.

Malleshi, N. G. and Desikachar, H. S. R. (1981) Varietal differences in puffing quality of ragi (Eleusine coracana). Journal of Food Science and Technology, India, 18 (1). 30-32, 7 ref..

Mancharkumar, B. and Gerstenkorn, P. and Seiler, K. and Bolling, H. (1978) On some correlations between grain composition and physical characteristics to the dry milling performance in maize. Journal of Food Science and Technology, India, 15 (1). 1-6, 10 ref..

Manisha, Guha and Zakiuddin Ali, S. (1998) Parboiling of brown rice: effect of variety and parboiling conditions. Journal of Food Science and Technology, 35 (6). 504-508, 17 ref..

Manjrekar, C. and Nusrath, Naseer. and Vishalakshi, M. P. (1986) The effect of polishing jowar (Sorghum vulgare) on the nutritive value of protein. Journal of Food Science and Technology, 23 (4). 228-231, 20 ref..

Manohar Kumar, B. (1978) Training of technical personnel for cereal milling industry. Indian Miller, 9 (1/2). pp. 27-35.

Manohar Kumar, B. and Kempf, W. (1978) On wet milling suitability of four maize cultivars. Journal of Food Science and Technology (India), 15 (6). pp. 253-255.

Manohar Kumar, B. and Mahadevappa, M. and Rao, P. V. S. and Desikachar, H. S. R. (1968) Relationship of the coarseness of rice (Oryza sativa) varieties to the thickness of bran and aleurone layers. Journal of Food Science and Technology (Mysore), 5 (4). 193-94, 4 ref..

Mehran, Aalami and Prasada Rao, U. J. S. and Leelavathi, K. (2007) Physicochemical and biochemical characteristics of Indian durum wheat varieties: Relationship to semolina milling and spaghetti making quality. Food Chemistry, 102. pp. 993-1005.

Muralidhar, K. and Theertha, D. P. and Ashwin, Kumar and Aashitosh, A. Inamdar and Suresh, D.Sakhare (2020) Effect of hydrothermal treatment on physical and semolina milling properties of barley. Journal of Food Engineering, 287. pp. 110-142. ISSN 0260-8774

Murthy, C. T. and Suvendu, Bhattacharya (2008) Cryogenic grinding of black pepper. Journal of Food Engineering, 85 (1). pp. 18-28.

Narasimha, H. V. and Ramakrishnaiah, N. and Pratape, V. M. and Sasikala, V. B. and Narasimhan, K. S. (2002) Milling and storage of pulses in India. Indian Food Industry, 21 (6). pp. 32-39.

Narayana Rao, M. and Gowri, Sur. and Swaminathan, M. and Subrahmanyan, V. (1958) Effect of milling on the nutritive value of jowar (Sorghum vulgare). Annals of Biochemistry and Experimental Medicine, 18. pp. 27-32.

Narayana Rao, M. and Gowri, Sur. and Swaminathan, M. and Subrahmanyan, V. (1958) Effect of milling on the nutritive value of jowar Sorghum vulgare. Food Science, 7. pp. 254-255.

Narayana Rao, M. and Swaminathan, M. (1953) Nutritive value of undermilled and milled raw rice. Bulletin of Central Food Technological Research Institute, 2. pp. 262-263.

Narayana Rao, M. and Viswanatha, T. and Mathur, P. B. and Swaminathan, M. and Subrahmanyan, V. (1954) Effect of storage on the chemical composition of husked, undermilled and milled rice. Journal of Science of Food and Agriculture, 9. pp. 405-409.

Nghi, T. T. and Narasimha, H. V. (1994) Performance of a plate mill and a modified Engelberg huller for small-scale dry milling and de-germing of maize. International Journal of Food Science and Technology, 29 (3). 347-352, 10 ref..

Parthasarathi, A. and Leelavathi, K. and Selvaraj, A. and Sidhu, J. S. (1987) Flour mill streams. II. Suitability for different baked products. Indian Miller, 18 (1). pp. 35-37.

Pichan, Prabhasankar and Punaroor Haridas, Rao (2001) Effect of different milling methods on chemical composition of whole wheat flour. European Food Research and Technology, 213. pp. 465-469.

Prabhasankar, P. and Sudha, M. L. and Haridas Rao, P. (2000) Quality characteristics of wheat flour milled streams. Food Research International, 33. pp. 381-386.

Pratape, V. M. and Narasimha, H. V. (2005) Influence of pretreatment and grinding machine on suitability of Bengalgram flour(Besan) for preparation of sev. Journal of Food Science and Technology (India), 42 (2). pp. 127-130.

Pratape, V. M. and Sashikala, V. B. and Narasimha, H. V. (2004) Mini Dhal Mill - an appropriate technology for Indian rural areas for processing of pulses. Journal of Rural Technology, 1 (2). pp. 87-90.

Preetham Kumar, K. Vishnuswamy and Usha, Dharmaraj and Suresh, D.Sakhare and Aashitosh, A. Inamdar (2016) Effect of grain moisture content during milling on pasting profile and functional properties of amaranth fractions. Journal of Food Science and Technology, 53 (5). pp. 2434-2442. ISSN 0022-1155

Prithivi, Shekara and Pavan Kumar, V. and Gangadharappa, G. H. (2013) Gravity flow operated small electricity generator retrofit kit to flour mill industry. Journal of Food Science and Technology, 50 (5). pp. 1006-1011.

Raghavendra Rao, S. N. and Ananthachar, T. K. and Desikachar, H. S. R. (1965) Oil content of bran from rice milled to different degrees of polishing. Journal of Food Science and Technology, 2. pp. 115-116. ISSN 0022-1155

Raghavendra Rao, S. N. and Narayana, M. N. and Desikachar, H. S. R. (1967) Studies on some comparative milling properties of raw and parboiled rice. Journal of Food Science and Technology, 4. pp. 150-155.

Rahim, A. and Vatsala, C. N. and Venkateswara Rao, G. and Shurpalekar, S. R. (1986) A small scale process for milling of wheat. II. A process for coarse grit (Dalia) milling. Journal of Food Science and Technology, 23 (4). 193-196, 4 ref..

Rahim, A. and Venkateswara Rao, G. and Shurpalekar, S. R. (1983) A small scale process for milling of wheat. I. Development of the process. Journal of Food Science and Technology, 20 (5). 191-195, 3 ref..

Raju, G. N. and Bhashyam, M. K. and Narasimha, H. V. and Murthy, S. S. and Srinivas, T. (1992) Grain morphology and structure in relation to milled product quality in maize (Zea mays L.). International Journal of Food Science & Technology, 27 (2). 213-220, 14 ref..

Raju, G. N. and Bhashyam, M. K. and Srinivas, T. (1990) Factors Affecting Scutellum Retention in Milled Rice. Journal of Food Science and Technology, 27 (1). pp. 7-12.

Rama Rao, G. and Desikachar, H. S. R. and Subrahmanyan, V. (1960) The effect of the degree of polishing of rice on nitrogen and mineral metabolism in human subjects. Cereal Chemistry, 37 (1). pp. 71-78.

Ramakrishnaiah, N. and Kurien, P. P. (1983) Variabilities in the dehulling characteristics of pigeon pea (Cajanus cajan L.) cultivars. Journal of Food Science and Technology, 20 (6). 287-291, 10 ref..

Ramakrishnaiah, N. and Pratape, V. M. and Sashikala, V. B. and Narasimha, H. V. (2004) Value addition to by-products from dhal milling industry in India. Journal of Food Science and Technology, 41 (5). pp. 492-496.

Ranga Rao, G. C. P. and Haridas Rao, P. and Leelavathi, K. and Shurpalekar, S. R. (1986) Effect of heat developed during grinding wheat in a disc mill on some chemical, rheological and chapati making characteristics of flour. Journal of Food Science and Technology, 23 (1). 29-32, 12 ref..

Ranganath, K. A. and Bhashyam, M. K. and Rao, Y. B. and Desikachar, H. S. R. (1970) Influence of time of harvest and environmental factors on grain yield and milling breakage of paddy. Journal of Food Science and Technology, 7 (3). 144-147, 12 ref.. ISSN 0022-1155

Rani, K. U. and Prasada Rao, U. J. S. and Leelavathi, K. and Haridas Rao, P. (2001) Distribution of enzymes in wheat flour mill streams. Journal of Cereal Science, 34 (3). 233-242, 44 ref..

Rao, S. N. R. and Narayana, M. N. and Desikachar, H. S. R. (1972) Pattern of change in silica, ash, crude fibre, whiteness and bran pigmentation with progressive polish in rice varieties. Journal of Food Science and Technology (Mysore), 9 (2). 51-53, 12 ref..

Rateesh, Krishnan and Meera, M. S. (2022) Monitoring bioaccessibility of iron and zinc in pearl millet grain after sequential milling. Journal of Food Science and Technology, 59 (2). pp. 784-795. ISSN 0022-1155

Satish Kumar, L. and Prakash, H. S. and Shetty, H. S. and Malleshi, N. G. (1991) Influence of seed mycoflora and harvesting conditions on milling, popping and malting qualities of sorghum (Sorghum bicolor). Journal of Science of Food and Agriculture, 55 (4). pp. 617-625.

Satyanarayana, A. and Siridhar, N. and Venkateswata Rao, M. and Krishna Murthy, G. V. (1991) Physical, chemical and milling characters of rice varieties. Andhra Agricultural Journal, 38 (2/3). pp. 133-138.

Shaik Akbar, Basha and Prasada Rao, U. J. S. (2017) Bioactivities of fractions obtained from green gram (Vigna radiata) milled by-products. Food Bioscience, 19. pp. 134-141.

Shams ud Din, M. and Bhattacharya, K. R. (1978) On the meaning of the degree of milling of rice. Journal of Food Technology, 13 (2). 99-105, 7 ref..

Shashidhar, M. G. and Krishna Murthy, T. P. and Girish, K. G. and Manohar, B. (2013) Grinding of Coriander Seeds: Modeling of Particle Size Distribution and Energy Studies. Particulate Science and Technology, 31. pp. 449-457.

Shurpalekar, S. R. and Rahim, A. and Venkateswara, Rao and Vatsala, C. N. (1983) A simple process for milling of wheat for bakery flour and atta. Indian Miller, 14 (1). pp. 25-27.

Shyam Ramkrishna, Garud and Archana, Gopalrao Lamdande and Hrishikesh, A. Tavanandi and Nilesh, K. M. and Udaikumar, N. (2022) Effect of physicochemical properties on popping characteristics of selected pearl millet varieties. Journal of Science of Food Agriculture, 102. pp. 7370-7378.

Siddharth, B. Tulse and Reshma, V. and Aashitosh, A. Inamdar and Suresh, D.Sakhare (2014) Studies on multigrain milling and its effects on physical, chemical and rheology characteristics of milled streams. Journal of Cereal Science, 60 (2). pp. 361-367.

Smitha, V. K. and Sourav, Kumar and Malleshi, N. G. (2008) Studies on the effect of milling finger millet in different pulverisers on physico-chemical properties of the flour. Journal of Food Science and Technology, 45 (5). pp. 398-405.

Sowbhagya, H. B. and Sathyendra Rao, B. V. and Krishnamurthy, N. (2008) Evaluation of size reduction and expansion on yield and quality of cumin (cuminum cyminum) seed oil. Journal of Food Engineering, 84 (4). 595-600 ; 14 ref..

Sowbhagya, C. M. and Zakiuddin Ali, S. and Ramesh, B. S. (1993) Effect of Parboiling on Grain Dimensions of Rice. Journal of Food Science and Technology (India), 30 (6). pp. 459-461.

Sreerama, Y. N. and Dennis, A. Neelam and Sasikala, V. B. and Pratape, V. M. (2010) Distribution of Nutrients and Antinutrients in Milled Fractions of Chickpea and Horse Gram: Seed Coat Phenolics and Their Distinct Modes of Enzyme Inhibition. Journal of Agricultural and Food Chemistry, 58. pp. 4322-4330.

Sreerama, Y. N. and Sashikala, V. B. and Pratape, V. M. (2010) Variability in the Distribution of Phenolic Compounds in Milled Fractions of Chickpea and Horse Gram: Evaluation of Their Antioxidant Properties. Journal of Agricultural and Food Chemistry, 58 (14). pp. 8322-8330.

Srinivas, T. and Bhashyam, M. K. and Narasimha Reddy, M. K. and Desikachar, H. S. R. (1981) Development of a modified technique for intra-varietal selection for low crack susceptibility and low milling breakage in rice. Indian Journal of Agricultural Sciences, 51 (4). 228-232, 5 ref..

Srinivas, T. and Desikachar, H. S. R. (1974) Removal of bran and aleurone layers at different points on the surface of rice grain during progressive polishing. Journal of Food Science and Technology, 11 (2). 83-84, 6 ref.. ISSN 0022-1155

Srinivas, T. and Lakshmi, T. K. and Desikachar, H. S. R. (1974) Varietal differences in puffing quality of paddy. Journal of Food Science and Technology, 11 (3). pp. 134-135. ISSN 0022-1155

Srirangarajan, A. N. and Desikachar, H. S. R. and Indiramma, K. and Sankaran, A. N. (1961) Note on variations in residual bran in individual rice grains from batches polished to different degrees. Cereal Chemistry, 38. pp. 391-392.

Subrahmanyan, V. and Desikachar, H. S. R. and Bhatia, D. S. (1955) Commercial methods of parboiling paddy and improvement of the quality of parboiled rice. Journal of Scientific and Industrial Research, 14A. pp. 110-114.

Subrahmanyan, V. and Narayana Rao, M. and Sankaran, A. N. and Swaminathan, M. (1956) Studies on the nutritive value of poor vegetarian diets based on husked, under milled and milled raw rice. Bulletin of Central Food Technological Research Institute, 5. pp. 214-215.

Subrahmanyan, V. and Narayana Rao, M. and Swaminathan, M. (1956) Nutritive value and keeping quality of husked, undermilled and milled raw rice. Bulletin of Central Food Technological Research Institute, 5. pp. 329-334.

Subrahmanyan, V. and Narayana Rao, M. and Swaminathan, M. (1956) Studies on the nutritive value of rice and rice diets. I. The nutritive value of husked, undermilled and milled raw rice. Annals of Biochemistry and Experimental Medicine, 16 (2). pp. 81-88.

Sur, B. K. and Iyengar, N. V. R. (1953) Wheat flour enrichement. Bulletin of Central Food Technological Research Institute, 2. pp. 267-269.

Suresh, D. Sakhare and Aashitosh, A. Inamdar (2011) Application of eight-roller mill in wheat flour milling process. Indian Food Industry, 30 (1). pp. 1-6.

Suresh, D. Sakhare and Aashitosh, A. Inamdar and Prabhasankar, P. (2020) Functional properties of roller mill processed fenugreek fractions. Journal of Food Measurement and Characterization, 14. pp. 3103-3111.

Suresh, D. Sakhare and Aashitosh, A. Inamdar and Prabhasankar, P. (2016) A study on rheological characteristics of roller milled fenugreek fractions. Journal of Food Science and Technology, 53 (1). pp. 421-430. ISSN 0022-1155

Suresh, D.Sakhare and Aashitosh, A. Inamdar (2014) The cumulative ash curve: a best tool to evaluate complete mill performance. Journal of Food Science and Technology, 51 (4). pp. 795-799. ISSN 0022-1155

Suresh, D.Sakhare and Aashitosh, A. Inamdar and Indrani, D. and Madhu Kiran, M. H. (2015) Physicochemical and microstructure analysis of flour mill streams and milled products. Journal of Food Science and Technology, 52 (1). pp. 407-414. ISSN 0022-1155

Suresh, D.Sakhare and Aashitosh, A. Inamdar and Prabhasankar, P. (2015) Roller milling process for fractionation of fenugreek seeds (Trigonella foenumgraecum) and characterization of milled fractions. Journal of Food Science and Technology, 52 (4). pp. 2211-2219.

Suresh, D.Sakhare and Aashitosh, A. Inamdar and Preetham Kumar, K. Vishnuswamy and Usha, Dharmaraj (2017) Evaluation of roller milling potential of amaranth grains. Journal of Cereal Science, 73. pp. 55-61.

Suresh, D.Sakhare and Aashitosh, A. Inamdar and Shwetha, B. Gaikwad and Indrani, D. and Venkateswara Rao, G. (2014) Roller milling fractionation of green gram (Vigna radiata): optimization of milling conditions and chemical characterization of millstreams. Journal of Food Science and Technology, 51 (12). pp. 3854-3861. ISSN 0022-1155

Swamy, N. R. and Ramakrishnaiah, N. and Kurien, P. P. and Salimath, P. V. (1991) Studies on carbohydrates of red gram (Cajanus cajan) in relation to milling. Journal of the Science of Food and Agriculture, 57 (3). 379-390, 33 ref..

Tara, K. A. and Bains, G. S. (1972) Effect of milling on the lysine content of flour of fortified wheat. Indian Journal of Nutrition and Dietetics, 9 (4). 206-207, 4 ref..

Tara, K. A. and Usha, M. S. and Prabhavathi, C. and Bains, G. S. (1971) Vitamin, mineral, colour grade and limiting amino acid contents of Indian commercial flours. Research and Industry, 16. pp. 196-202.

Tirupati, Pawar and Pavan Kumar, P. and Ashwin Kumar, M. S. and Jyothi Lakshmi, A. and Suresh, D. Sakhare (2020) Milling interventions for the production of atta for Indian flat bread with low carbohydrate digestibility. Journal of Food Science and Technology, 57 (9). pp. 3400-3408. ISSN 0022-1155

Usha, Dharmaraj and Ravi, Ramaswamy and Malleshi, N. G. (2013) Optimization of Process Parameters for Decortication of Finger Millet Through Response Surface Methodology. Food and Bioprocess Technology, 6. pp. 207-216.

Velu, V. and Nagender, A. and Prabhakara Rao, P. G. and Rao, D. G. (2006) Dry milling characteristics of microwave dried maize grains (Zea mays L.). Journal of Food Engineering, 71 (1). pp. 30-36. ISSN 0260-8774

Venkateswara Rao, G. and Indrani, D. and Shurpalekar, S. R. (1985) Effect of milling methods and extraction rates on the chemical, rheological and bread making characteristics of wheat flours. Journal of Food Science and Technology, 22 (1). 38-42, 4 ref..

Venkateswara Rao, G. and Shurpalekar, S. R. and Bolling, H. (1985) Studies on milling of flours of high extraction rates from Aestivum wheats. Indian Food Industry, 4 (1). pp. 11-15.

Venkateswara Rao, G. and Shurpalekar, S. R. and Menger, A. (1986) Studies on milling and noodle making quality of different extraction rate semolinas from durum wheat. Journal of Food Science and Technology, 23 (3). 121-126, 12 ref..

Vetrimani, R. and Haridas Rao, P. (1990) Studies on Stabilization of Wheat Bran. Journal of Food Science and Technology, 27 (5). pp. 332-335.

Viraktamath, C. S. and Desikachar, H. S. R. (1971) Inactivation of lipase in rice bran in Indian rice mills. Journal of Food Science and Technology, 8 (2). 70-74, 11 ref.. ISSN 0022-1155

Viraktamath, C. S. and Raghevendra, G. and Desikachar, H. S. R. (1971) Use of rice milling machinery for commercial pearling of grain sorghum (jowar) and culinary uses for pearled sorghum products. Journal of Food Science and Technology (India), 8 (1). pp. 11-13. ISSN 0022-1155

Book

Hampapura, V. Narasimha and Ramakrishnaiah, N. and Pratape, V. M. (2007) Milling of Pulses. Handbook of Postharvest Technology: Cereals, Fruits, Vegetables, Tea and Spices . Marcel Dekker.

Thesis

Aashitosh, A. Inamdar (2017) Studies on the influence of processing variations and pretreatment to Indian wheat on the quality of atta (whole wheat flour). Doctoral thesis, University of Mysore.

Abdul, Halim (1970) Milling of rice : on the problem of stickiness in polishing of parboiled brown rice. Masters thesis, Central Food Technological Research Institute.

Amrita, Ray (2022) Fractionation of Quinoa (Chenopodium quinoa) Using Roller Milling for Their Nutritional Utilization in Food Product Development. Doctoral thesis, Central Food Technological Research Institute.

Darshan, N. M. (2016) Mill Stream Analysis- A review. Masters thesis, University of Mysuru.

Eswaran, K (1993) Vital gluten production, properties and uses. Masters thesis, Central Food Technological Research Institute.

Harish, Jelda (2009) Nutraceuticals in Cereal Milling Byproducts. Masters thesis, University of Mysore.

Indudhara Swamy, Y. M. (1977) Studies on breakage of rice during milling. Masters thesis, Central Food Technological Research Institute.

Jyoti, G. S. (1982) Degree of milling of rice. Masters thesis, Central Food Technological Research Institute.

Kamalakar, K. N. (1984) Application of roller flour mill in processing of some cereals and millets. Masters thesis, Central Food Technological Research Institute.

Lockwood, L. M. (1973) Organophosphate pesticides for use as grain protectants in India : Degradation of their residues during milling and cooking of cereal grains. Masters thesis, Central Food Technological Research Institute.

Murali Raju, V. (1983) Effect of relative humidity moisture on wheat flour milling. Masters thesis, Central Food Technological Research Institute.

Nakul Joshi, S. (2018) Effect of the degree of polishing in pearl millet and its role as a pre-diabetic food. Masters thesis, Academy of Scientific and Innovative Research.

Nirmala Hadimani, A. (1994) Studies on pearl millet grain quality with special emphasis on milling and popping of millet. Doctoral thesis, Central Food Technological Research Institute.

Prasanta, Sarkar (1994) Dough stickness. Masters thesis, Central Food Technological Research Institute.

Prashant Bhimappa, Doni (2018) Techno Commercial Advances In Whole Wheat Milling. Masters thesis, Central Food Technological Research Institute.

Raghunandhan, R (1987) Damaged wheat and its effect on milling and baking. Masters thesis, Central Food Technological Reseach Institution.

Ramees, P. M. (2019) By-products of pulse milling. Masters thesis, Central Food Technological Research Institute.

Shrestha, K. B. (1972) Dehusking of Varagu (Paspalum crobiculatum) and its utilization for edible purposes. Masters thesis, Central Food Technological Research Institute.

Suresh, D. Sakhare (2016) Roller milling fractionation of fenugreek and utilization of fiber rich fraction in development of wheat based food products. Doctoral thesis, University of Mysuru.

Venkateswara Rao, G. (1983) Studies on milling and utilisation of high extraction flour and semolina from Indian wheats. Doctoral thesis, Central Food Technological Research Institute.

Vignesh, Nayaka N (2021) Influence of Ageing of Paddy on Cooking and Milling Properties. Masters thesis, Central Food Technological Research Institute.

Vishal, B. Trivedi (2012) A literature survey on grinding of cereals, legumes and spices. Masters thesis, University of Mysore.

Student Project Report

Abhishek, Upadhyay (2015) Isolation of Arabinoxylan from Different Fractions of Finger Millet. [Student Project Report] (Submitted)

Ananda, J. and Gopalkrishna, Pai and Goutham, M. and Sandeep, P (2005) Design and Devolopment of Small Capacity Millet Polisher. [Student Project Report]

Anoosha, K. (2015) Studies on milling of Chia (Salvia hispanica L.) seeds and determination of physicochemical properties. [Student Project Report] (Submitted)

Anthony, Manoj Kumar Y. and Kumar, M. and Shivakumara, M. (2012) Design and Development of Improved Impact Huller Machine. [Student Project Report] (Submitted)

Anuradha, Bhat Sondi. (1976) Effect of parboiling on the fat content of milled rice and bran. [Student Project Report] (Submitted)

Ashmita, Singh (2017) Roller milling of grains for the development of gluten free semolina and its product making properties. [Student Project Report] (Submitted)

Asma Nazreen, K. A (2009) Separation of Germ from Rice Bran and Studies on its Chemical Properties. [Student Project Report]

Aswin Bhaskar, T. (2023) Modification of wheat starch using different milling techniques and its impact in cookies preparation. [Student Project Report] (Submitted)

Atul, S (2023) Modification of wheat starch by using different milling techniques and its impact in bread preparation. [Student Project Report] (Submitted)

Aviva, Santhmayor (2016) Study on evaluation and standardization of nutritionally dense product made from the byproduct of wheat germ milling process. [Student Project Report] (Submitted)

Charumathy, G. (2010) Effect of Parboiling On Physicochemical and Phytochemical Properties of Pigmented Rice. [Student Project Report]

Gaurav, Dixit (2018) Milling of Brown Top Millet. [Student Project Report] (Submitted)

Girish, N. (2020) Effect of grading of paddy on milling characteristics and comparative study of physical, cooking and textural properties of IR 64 and Meenakshi varieties of paddy. [Student Project Report] (Submitted)

Hari Prasad, N. (2019) Impact of Polishing on Physicochemical Composition in Traditional Rice Varieties of Salem, Tamil Nadu. [Student Project Report] (Submitted)

Harsha Vardhan Babu, N. (2011) A Study on Calculation of Energy for Parboiling and Flaking of Paddy and Jowar. [Student Project Report]

Kalandar, M (2023) Storage studies of different milled fraction in Vitamin D3 fortified wheat flour. [Student Project Report] (Submitted)

Major Mohit, Arora (2016) Effect of pre-milling on grinding characteristics of wheat and quality of chakki atta (whole wheat flour). [Student Project Report] (Submitted)

Meghashyam Sandeep, V. (2010) Studies on Size Reduction of Black gram and development of Windows Application. [Student Project Report]

Mohamed, Shahid. J. (2016) Standardization of Chia Seeds Milling and Development of Traditional Food Product(S) From Raw and Processed Seeds. [Student Project Report] (Submitted)

Muralidhar, Karanam (2016) Roller Semolina Milling of Barley and Its Effect on Upma Making Properties of Wheat Semolina. [Student Project Report] (Submitted)

Nagesh Kamalakar, K. (1985) Production of refined sorghum flour and its utilisation. [Student Project Report] (Submitted)

Nghi, T. T (1987) Dry maize milling and some products from maize and weaning food from maize and green gram for Vietnamese children. [Student Project Report] (Submitted)

Pardhasaradhi, S. (1985) Suitability of different milling streams for cookie making. [Student Project Report] (Submitted)

Pooja, Saxena (2023) Study on the milling properties and improving the yield of horse gram. [Student Project Report] (Submitted)

Prashant Bhimappa, Doni (2019) Studies on effect of differential grinding on the whole wheat flour and its product making characteristics. [Student Project Report] (Submitted)

Prithivi, Shekara and Pavan Kumar, V. (2010) Design and Development of Wheat Flow Operated Small Generator Retrofit Kit to Flour Mill Water Wheel Dampner. [Student Project Report]

Ramees, P. M. (2020) Characteristics of extruded blackgram milled by-products. [Student Project Report] (Submitted)

Ravi, Dube (1985) Rheological characteristics of different mill streams. [Student Project Report] (Submitted)

Sandra Pauly, K (2023) Biochemical and functional characteriation of milling by-products of grains. [Student Project Report] (Submitted)

Shaba, Noore (2019) Studies on milling of Buckwheat and development of nutritious products. [Student Project Report] (Submitted)

Shams-Ud-Din, M. D. (1975) Difference in the pattern of removal from the rice by different milling equipments. [Student Project Report] (Submitted)

Siddharth, B. Tulse (2013) Comilling of wheat with other grains. [Student Project Report] (Submitted)

Sowmya , R. S. (2012) Studies on effect of grading paddy prior to parboiling on its quality and energy consumption during milling. [Student Project Report] (Submitted)

Sumeet, S. Devidan (2010) Studies on Size reduction of Rice. [Student Project Report]

Vignesh, Nayaka (2020) Influence of Ageing of Paddy on Milling, Cooking and Textural Properties of Rice. [Student Project Report] (Submitted)

Vinita, Mansharamani (1990) Suitablility of different mill streams from soft wheat flour for cake making. [Student Project Report] (Submitted)

Vishal, B. Trivedi (2013) Grinding of cereals and pulses using selected machineries- methods and energy comparison. [Student Project Report] (Submitted)

Viswa Teja, Musiki (2016) Milling intervention for the development of whole wheat flour (atta) for pasta making. [Student Project Report] (Submitted)

Vitthal,, R. P. (1987) Studies on salt reduced bread. [Student Project Report] (Submitted)

This list was generated on Fri Mar 29 07:26:38 2024 IST.